Download Stock Firmware for Infinix X653:
Official Stock Firmware Flash File Now available for the Infinix X653 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box.
Infinix X653 Run on Android 9.0 and it is Powered by Mediatek MT6761 Processor. it is a dual SIM (GSM) Smartphone that support Nano-SIM card. connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G. The device come with 3GB of RAM and 32GB of Storage that can be expandable via SD card
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Infinix X653
Type: Full ROM
Size: up to 742MB
SoC: Mediatek MT6761
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: X653-H6114NOP-PGo-191107V211
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware/Flash File | X653-H6114NOP-PGo-191107V211 | Download |
How to Install Stock Firmware on Infinix X653:
- Extract downloaded stock firmware..
- Install Mediatek Vcom driver on Your computer.
- Download & Extract smartphone Flash tools on computer
- From the flash tool folder Run SP_Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
How to Flash Infinix Smart 4 using Tecno Flash tool:
- Download & Extract Firmware
- Download & Extract tecno flash tool
- Install Mediatek VCOM driver on Computer
- open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
- click on grey ‘Settings icon’ on the top-Left corner of the screen.
- In the Popup Click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
- Connect Your Switched of phone to Computer by Pressing volume up & down Key
- Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar
- Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it on.
Read also:
have any question Let Me Know via Comment.