Infinix Smart 4 X653c Firmware Flash File

Download Stock Firmware/Flash File For Infinix Smart 4:

Download Official Stock Firmware Flash File For Infinix Smart 4. If You own Infinix Smart 4. Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

Infinix Smart 4. Run on android 9.0 & it is Powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone Support Nano-SIM Card’s, Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.

The device Come with 1GB of RAM and 16GB of Storage can be expandable via SD card. in camera department it come with 8MP Dual Rear camera With 5MP Front Shooter.

Note-

  • Must backup NVRAM using this Guide
  • Please Do carefully, we are not Responsible for any damage to Your device.
  • Flashing the ROM Will Erase all Your Personal Data Including Storage. So we advice You to First Make a Complete backup of Your Phone.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information:

Device Name: Infinix Smart 4
Type: Full ROM
Size: up to 1.5GB
SoC: Mediatek MT6761
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: X653C-H6114GH-PGo-191119V207

Downloads:

Firmware :

Flash Tools:

Driver: 

  • Mediatek Preloader V-COM Driver Here

How to Install Stock Firmware on Infinix Smart 4:

  • Download and Install Mediatek Vcom Driver on Your PC.
  • Download & Extract SP Flash tools, Run SP Flash tool.exe
  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download Only. Click Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On

How to Flash using Tecno Flash tool:

  • Download & Extract Firmware
  • Download & Extract tecno flash tool
  • Install Mediatek VCOM driver on Computer
  • open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
  • click on grey ‘Settings icon’ on the top-Left corner of the screen.
  • In the Popup Click load & Select  MT6XX_Android_scatter.txt File From Firmware Folder
  • Connect Your Switched of phone to Computer by Pressing volume up & down Key
  • Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar

  • Once done, flashing bar will turn Green, now disconnect your phone from your computer & switch it on.
Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.