Huawei P20 Pro MT6572 Clone Firmware Flash File

Download Stock Firmware Flash File for Huawei P20 Pro MT6572 Clone:

Official Stock Firmware Flash File Now available for the Huawei P20 Pro MT6572 Clone & You can download it from below. by using this firmware you can solve all software Issues on your Huawei P20 Pro MT6572 Clone such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • backup NVRAM using this guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Huawei P20 Pro MT6572 Clone
Type: Full ROM
Size: up to 265MB
SoC: Mediatek MT6572
Os: Android
Password: Null
Gapps: Included
Root access: Not
Firmware Version: MT6572_EMMC_Huawei-P20.Pro_x6_v5_x50_Hongyue_W106_V43_3G_P20_pro

Download Links:

How to Install Stock Firmware on Huawei P20 Pro MT6272 Clone:

  • Extract Downloaded firmware.
  • Install Mediatek VCOM driver on Your computer.
  • Download & extract smartphone Flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)

  • flashing Process Started. once done, unplug device & switch it ON

Note: if there is no USB device then you have to check for USB driver or try test Point

Read also:

have any issue, Let me know via comment


LEAVE A REPLY

Please enter your comment!
Please enter your name here

three × four =