B178 official Firmware update For the honor Play 8C:
Download & Install b178 official Firmware update For Huawei honor Play 8C. if you own Huawei honor Play 8C Smartphone then You Can Download Latest Firmware update For it. B178 Firmware update For Huawei honor Play 8C available for all it’s users via The OTA So You Can Check For update From about_Phone/System_update Section . if you have not Yet Receive it then You can Download it From the below.
b178 update For the Huawei honor Play 8C Come with Some Camera and Gesture improvement’s With the Latest Google Security Patches. A Complete Changelog File also attached with the Firmware You can Check it before Download.
the Huawei honor Play 8C Smartphone is Run on Android 8.1 OS Which is Powered by QCOM SD 632 Processor. The Device Come with the 3GB of RAM and 32GB of Storage.
Note-
1.Must Create a backup of Your ROM and Personal data.
2.it will Erase all your Data Include Personal information.
3.Make Sure Your Phone Have at least 40-50% Charge to Prevent accidental Shut Down.
4. Method 3 is best. dload Method only for MM Devices with SD card update. Method 1& 2 are optional.
Firmware Information-
- Device: Huawei honor Play 8C/ honor 8C
- Model No: BKK-AL00 BKK-AL10
- Android OS: 8.1
- EMUI: 8.2
- Firmware: B178
- Status: Official
- Type: Full firmware image
- Size : up to 4 GB
Download-
Tools:
BKK-AL10C00B178 BKK-AL00C00B178 BKK-TL00C00B178 (8.2.0.178) Changelog
Full and Public File are Common For all Models.
How to Install official Firmware update on Huawei honor Play 8C:
- Download HiSuit From Here
- Set the DNS address 81.177.139.39 in Your network connection.
- Connect the phone with PC With HiSuite Running, wait until it Installs the mobile application and join the phone.
- In HiSuite, Click “Update” and agree to Install the update found. Then Cancel the Installation, go to the folder C: \ Users \% username% \ Documents \ HiSuite \ ROM . Replace files with the extension “.zip.dbk” with pre-downloaded firmware files ( update.zip, update_full_ * .zip, update_data_full_public.zip ).
- Again, Click “Update” and see that the firmware is loaded 100%, after which the download will Start on the Phone.
- Restoring the DNS settings to the original value, since during the update authentication, an error like “Server is not available” is possible.
- When the firmware is downloaded – the phone will reboot and start the installation
Method 2 With twrp:
- Download update Package From above
- Download HuRupdater.zip and Move it to Device Storage along with update file.
- Make Sure all Files (Like full, public, and update zip) available in Same Folder
- Reboot Phone to twrp Recovery. Go to backup and Create a nandroid backup
- Go to Install and Install HURupdater.zip. Done Reboot system Now.
- if the Phone is not bootup Then Flash no verity opt Encrypt.zip. Done
More Method:
- Some More Installation Method Here