How to Install B150 Firmware on Huawei P Smart Plus

B150 official Firmware update For the Huawei P Smart Plus:

Download & Install b150 official Firmware update For Huawei P Smart Plus. if you own Huawei P Smart Plus Smartphone then You Can Download Latest Firmware update For it. B150 Firmware update For Huawei P Smart Plus available for all it’s users via The OTA So You Can Check For update From about_Phone/System_update Section . if you have not Yet Receive it then You can Download it From the below.

b150 update For the Huawei P Smart Plus Come with latest Android 9.0 Pie update with Some Camera improvement’s & Latest Google Security Patches. A Complete Changelog File also attached with the Firmware You can Check it before Download.

the Huawei P Smart Plus Smartphone is Run on Android 8.1 OS Which is Powered by Kirin 710 Processor. The Device Come with the 4GB of RAM and 64GB of Storage.

Note-


1.Must Create a backup of Your ROM and Personal data.
2.it will Erase all your Data Include Personal information.
3.Make Sure Your Phone Have at least 40-50% Charge to Prevent accidental Shut Down.
4. Method 3 is best. dload Method only for MM Devices with SD card update. Method 1& 2 are optional.

Firmware Information-

  • Device: Huawei P Smart Plus
  • Model No: INE-L21 INE-LX1
  • Android OS: 9.0
  • Pie: 9.0.0.150
  • EMUI: 9.0
  • Firmware: B150
  • Status: Official
  • Type: Full firmware image
  • Size : up to 4 GB

Download-

Tools:

INE-LX1C10E2R1P1T8B150 (9.0.1.150) INE-L21C10E2R1P1T8B150 Changelog

How to Install official Firmware update on Huawei P Smart Plus:

  • Download HiSuit From Here
  • Set the DNS address 81.177.139.39 in Your network connection.
  • Connect the phone with PC With  HiSuite Running, wait until it Installs the mobile application and join the phone.
  • In HiSuite, Click “Update” and agree to Install the update found. Then Cancel the Installation, go to the folder C: \ Users \% username% \ Documents \ HiSuite \ ROM . Replace files with the extension “.zip.dbk” with pre-downloaded firmware files ( update.zip, update_full_ * .zip, update_data_full_public.zip ).
  • Again, Click “Update” and see that the firmware is loaded 100%, after which the download will Start on the Phone.
  • Restoring the DNS settings to the original value, since during the update authentication, an error like “Server is not available” is possible.
  • When the firmware is downloaded – the phone will reboot and start the installation

Method 2 With twrp:

  • Download update Package From above
  • Download HuRupdater.zip and Move it to Device Storage along with update file.
  • Make Sure all Files (Like  full, public, and update zip) available in Same Folder
  • Reboot Phone to twrp Recovery. Go to backup and Create a nandroid backup
  • Go to Install and Install HURupdater.zip. Done Reboot system Now.
  • if the Phone is not bootup Then Flash no verity opt Encrypt.zip. Done

More Method:

  • Some More Installation Method Here