Flashing Huawei Y5 2019 no fastboot mod No Recovery:
Step by Step Guide to Flash Huawei Y5 2019. by using this Method you can Flash Huawei Y5 2019 even if it does Not have fastboot & recovery mod access. this Method Properly tested and Working on this devices. You Must have basic device disassemble Knowledge to Perform test point.
Pre-Requirements
- backup Your NVRAM using this Guide
- disassemble Your Phone (Require for test Point)
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Downloads:
- Firmware AMN-LX9: Download
- VCOM USB Driver: Download
- SP Flash tools: Download
- DA File for AMN-LX9/ AMN-L21/ AMN-L03
Instructions /Steps:
- Extract Downloaded Official Stock ROM..
- Install Mediatek Vcom Driver on Your PC.
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Same Load DA and Authentication Files (Downloaded From above)
- Select Download Only. Click Download & Connect Your Switched off Phone
- take a Coper Wire and Short the Pinout as Show in below image
- You can see Flashing Process On Screen. after Complete unplug & Switch it On