Vivo 1802 PD1803BF Flashing Via SP Flash tool:
Step by Step Guide to Flash Vivo 1802 Without using the aftools. here we Share Working SP Flash tools Method to unbrick Vivo 1802.
Vivo 1802 Run on android 8.1 & it is Powered by Mediatek MT6762 Processor. it is a Dual SIM (GSM) Smartphone that Support Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Downloads:
How to Flash Vivo 1802:
- Extract Downloaded Official Stock ROM..
- Install Mediatek Vcom Driver on Your PC.
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Same Locate the Download Agent aka DA File & authentication file aka Auth file
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.