CUBOT X30 P (X30) Firmware Flash File Solutions & Tools

Installation Guide for Stock Firmware on CUBOT X30 P

1. Download FlashTool According device chip
2. Install usb driver (oplus all in one driver installer)
3. Download & Unzip ROM
4. Open FlashTool
5. Browse and Select Firmware
6. Click Download/Flash
7. Plug Switched off device by pressing Volume up + down button
8. Once done, the device start itself..

Note: some devices require auth, in that case you have to use official Auth tool or third party supported tool

Flash Tool Links

SP Flash Tool, QFIL or Upgrade download tool according the device chip.

Bootloader Unlocked Devices:

• Flash using fastboot enhance tool

Contact Me for unbrick, frp, reset, region change , root & auth flash

---

⚠️ Disclaimer & Safety Guidelines

• Proceed at your own risk – Wrong flashing may brick your device.
• Always make a full backup before process.
• Make sure your device is charged.

---

Note: All resources on this page are sourced from public domains and community efforts. For removal requests or issues, contact us directly.