Oreo update for Mate 9 Pro-
official android 8.0 oreo with the EMUI 8.0 Now available for the Huawei Mate 9 Pro, if you own Huawei Mate 9 Pro then you are on a correct place, in the article we share latest official oreo Firmware With EMUI 8.0 update Which is available for Asia and EUROPE users, The New Oreo Update for the Huawei Mate 9 Pro Come with a lot’s of new features including latest EMUI 8.0 Features, the New UI Provide Smooth user experience with great UI. Follow Below Guide to update Huawei Mate 9 Pro to official android 8.0.
Note-
1.Must Create a backup of your ROM and Personal data.if will help You to Restore or Fix Bootloop.
2.This Guide is Work only on Listed Device So make Sure You have correct Device, Don’t try on any other Device otherwise it will cause bootloop.
3.We are not responsible for any Damage.
4.it will erase all your Data Include personal information, so create a backup of personal data including NVRAM.
5.Make Sure Your phone Have at least 40-50% Charge to prevent accidental Shut Down.
Firmware Information –
- Device – Huawei Mate 9 Pro
- Model – LON-L29
- Android Version – 8.0
- EMUI Version – 8.0
- Firmware – B323
- Build Number – LON-L29 8.0.0.323 (C432log)/LON-L29 8.0.0.302 (C636)
- Region – Europe/Asia
- Status – Official
- Type – Full firmware image
- Changes – Changelog
Download-
1) Download Huawei Mate 9 Pro 8.0.0.323 Oreo Update LON-L29 8.0.0.323 (C432log) (Europe) –
LON-L29D 9.0.1.185 Pie:
- Full update SD card Method
How to Install Android 8.0 Oreo On Huawei Mate 9 Pro –
Method 1 using HWOTA Tool–
1) Requirements for this method.
- You need to unlock the bootloader of Huawei Mate 9 Pro first, Skip it if you already had it unlocked.
- Download HWOTA_LON.zip file.
- Download the above three files and rename the “update_data_full_public.zip” file to update_data_public.zip and “update_full_hw_usa.zip” to update_all_hw.zip.
2) First download the HWOTA_LON.zip from above and extract it on your PC or your device SD Card.
3) Now download all three update, data, and public files (make sure you rename the files as mentioned above) and copy them either in the external SDCard inside an HWOTA folder or in the PC in the C:\..\HWOTA\update folder.
4) Run the update.bat file as an administrator, It will ask you if you copied the files. Press any key to continue.
5) Now connect your device and Reboot into Bootloader mode using “Volume Down + Power” or just use “adb reboot bootloader” then press any key.
6) The above step will install TWRP in your device.
7) Now Disconnect USB Cable and turn off your device and use “Volume Up + Power” to enter TWRP.
8) Once you’re in TWRP mode, plug in the USB cable again and press the Enter key on your computer.
9) If your files are saved in the HWOTA folder on the SD card, type 1 and press ENTER and if files are saved in the HWOTA/Update folder on your PC, type 2 and press ENTER.
10) It’ll ask you the update type, again type 1 and press the Enter button twice.
11) Done! Above step will start the installation of files on your device
Method 2 using HiSuite–
1) First you need to download two files.
2) Run Huawei Updater, check the box “Custom ROM” and “Custom Port”
3) In Custom ROM enter the correct ROM version for flashing [for example: LON-L29 8.0.0.323 (C432log)]
4) In Custom ROM enter correct ROM URL (For example: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1913/g1699/v99564/f1)
5) Now click on “Start” button and accept waiting alert messages.
6) Now connect your phone to HiSuite. Make sure device recognized by HiSuite and connected properly.
7) In HiSuite windows, open Settings –> General –> Custom Proxy and configure below changes –
- Address: 127.0.0.1
- Port: 41279
8) Go back to main HiSuite windows and click on “System update”
9) Press Update and wait for download firmware.
10) Your device will reboot and start upgrading.