Download Stock Firmware/ Flash File for Poco X3 Pro (Vayu):
official Stock Firmware/ Flash File Now available for Xiaomi Poco X3 Pro and You can download it from below. by using this firmware you can solve all software Issues with in your Poco X3 Pro such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Poco X3 Pro Run on Android 11 & it is Powered by QCOM SD860 Processor. it is a dual SIM smartphone support Nano GSM SIM card, connectivity Option’s Include 3G 4G GPS, Wi Fi, bluetooth etc, sensor Include Goryo Proximity Gravity etc. the device come with 12GB of RAM and 256GB storage that can be expandable via SD card.
Note:
- Must make a backup of Your ROM and Personal data.
- it will erase all your data Include Personal Information.
- Make sure Your Phone have at least 40-50% Charge to Prevent accidental shut down.
Must Require:
Firmware Information:
Device Name: Poco X3 Pro
Type: Full ROM
ROM Size: up to 4.4GB
SoC: QCOM SD860
Os: Android 12
Password: null
Gapps: Included Expect China ROM
Root access: Not
Firmware version: V12.0.4.0.RJUEUXM
Downloads Links:
EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)
- V13.0.3.0.SJUMIXM | 12.0 GLO: Download
- V13.0.3.0.SJUEUXM | 12.0 EEA: Download
- V13.0.1.0.SJURUXM | 12.0 Russia: Download
- V13.0.1.0.SJUTRXM | 12.0 Turkey: Download
- V13.0.1.0.SJUIDXM | 12.0 Indonesia : Download
- Android 11 ROM’s:
- V12.5.1.0.RJUEUXM EEA Stable: Download
- V12.5.4.0.RJUINXM India Stable: Download
- V12.0.4.0.RJUMIXM Global Stable: Download
- V12.5.1.0.RJUTWXM Taiwan Stable: Download
Flash Tools:
- MI Flash Here
- No Auth Firehose for Poco X3 Pro: N/A Yet
usb Driver:
- QD Loader Driver: Here
How to Flash Poco X3 Pro Via MI Flash:
- Download and Install usb driver on your computer
- Download Extract & Install MI Flash tools
- Now Run MI Flash tools Click Refresh
- Select Extracted Fastboot ROM folder
- Reboot Phone to bootloader (or EDL Mod) and connect it to computer
- Click Start and wait until success. once done, disconnect device & switch it ON
test Point Pinout for EDL Mod:
coming soon
Read also: