Download Stock Firmware /Flash File For CPH2083EX oppo A12:
official Stock Firmware Flash File Now available for the Oppo A12 & You can download it From below. The ROM is Flashable only With the oppo Download tool & it Require a authorized Oppo id.
Oppo A12 Run on Android 9.0 & it is Powered by Mediatek MT6765 Processor. it is a Dual SIM (GSM and GSM) Smartphone Support Nano-SIM Cards. Connectivity options Include Wi-Fi hotspot GPS Bluetooth OTG FM 3G and 4G.
The device come with 3/4GB of RAM and 32/64GB of Storage Can be Expandable via SD Card. in camera department it come with 13+2MP Rear Camera With a 5MP Front Shooter.
Note:
- Flashing the ROM will erase all Your Personal Data including Storage. So we advice You to First Make a Complete backup of Your Phone.
- Please Do carefully, We are Not Responsible for any Damage to Your Device.
- Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:
Firmware Information:
Device Name: Oppo A12
Type: Full ROM
ROM Size: up to 6.9GB
SoC: Mediatek MT6765
Os: Android 9
Password: Null
Gapps: Included
Root access: Not
Firmware version: CPH2083EX_11_A.49_201126_11abc810
Downloads Links:
EDL Firmware:
full firmware to reinstall board software (only for dead and bootloop devices)
- CPH2083EX_11_A.49_201126_11abc810 (new): Download
- CPH2083EX_11_A.67_220118_8c90b29e GLO New : Download
Flash tools:
usb Driver:
How to Flash Via SP Flash tools (No Auth):
- unpack downloaded Firmware using this tool
- Install Mediatek Vcom driver on Your computer
- Disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- on SP flash tool Setup Connection Like below Images
- Click Options > Options > connection and make the settings as in the screenshot (UART connection mode)
- Select Download only. Click Download & Connect Your switched off Phone to computer by pressing volume up and down key (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- You can see Flashing Process On Screen. after Complete unplug & switch it on
How to Flash/unbrick Via Oppo Download tool:
- Extract ROM File & Download tool in same folder
- Now Install VCOM driver on PC
- connect Phone to computer in this way USB+ Volume up+ Volume down key (make sure all driver are installed, if No USB VCOM device then you have to do test point)
- Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.
Related: