Download Stock Firmware Flash File for Conquest S20 5G:
Official Stock Firmware/ Flash File Now available for the Conquest S20 5G & You can download it from below. by using this firmware you can solve all software Issues with in your Conquest S20 5G such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Conquest S20 5G Run on Android 11 and it is Powered by Mediatek MT6873 Processor. it is a dual SIM Smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 8GB of RAM and 128GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a device
- to upgrade a device
- Fix some serious issue in device
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on a device
- completely Re-Installation of board software
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Conquest S20 5G
Type: Full ROM
Size: up to 2.1GB
SoC: Mediatek MT6873
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: S20-256G8G-fhdp-r0-bom4-cts-ru_conquest-S20_V0.7-20210716_user
Download Links:
How to Install Stock Firmware on Conquest S20 5G:
- Extract Downloaded firmware.
- Install Mediatek VCOM driver on Your computer.
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
- flashing Process Started. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
have any issue, Let me know via comment