Download Stock Firmware Flash File for Blackview BV6600:
Official Stock Firmware Flash File Now available for the Blackview BV6600 & You can download it from below. by using this firmware you can solve all software Issues on your Blackview BV6600 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Blackview BV6600 Run on Android 10 and it is Powered by Mediatek MT6762 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, bluetooth 3G & 4G. The device come with 4GB of RAM and 64GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of board software
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Blackview BV6600
Type: Full ROM
Size: up to 1.8GB
SoC: Mediatek MT6762
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: BV6600_S1_210628
Download Links:
How to Install Stock Firmware on Blackview BV6600:
- Extract Downloaded firmware.
- Install Mediatek VCOM driver on Your computer.
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
- flashing Process Started. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
have any issue, Let me know via comment