Download Stock Firmware Flash File for Maxwest Nitro Phablet 7N:
Official Stock Firmware/ Flash File Now available for the Maxwest Nitro Phablet 7N & You can download it from below. by using this firmware you can solve all software Issues with in your Maxwest Nitro Phablet 7N such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Must Require:
Pre-Requirement’s
- backup NVRAM using this guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Maxwest Nitro Phablet 7N
Type: Full ROM
Size: up to 1.2GB
SoC: Mediatek
Os: Android 7.0
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Maxwest_Nitro_Phablet_7N_V12_09272020
Download Links:
How to Install Stock Firmware on Maxwest Nitro Phablet 7N:
- Extract Downloaded firmware.
- Install Mediatek VCOM driver on Your computer.
- Download & extract smartphone Flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
- flashing Process started. once done, unplug device & switch it ON
Note: if there is no USB device then you have to check for USB driver or try test Point
Read also:
have any issue, Let me know via comment