Download Stock Firmware for Cubot J9:
Official Stock Firmware Flash File Now available for the Cubot J9 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box.
Cubot J9 Run on Android 10 and it is Powered by Mediatek MT6580 Processor. it is a dual SIM (GSM) Smartphone that support Nano-SIM card. connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G. The device come with 2GB of RAM and 16GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Cubot J9
Type: Full ROM
Size: up to 829MB
SoC: Mediatek MT6580
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: CUBOT_J9_A021C_V13_20200925
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware/Flash File | CUBOT_J9_A021C_V13_20200925 | Download |
updates:
- CUBOT_J9_A021C_V15_20201026: Download
How to Install Stock Firmware Cubot J9:
- Extract Downloaded Stock Firmware..
- Install Mediatek Vcom driver on Your computer.
- Download & Extract Smartphone Flash tools on computer
- From the Flash tool Folder Run SP_Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after complete unplug & switch it on
Read also:
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.