How to Install official Android 10 Firmware on Motorola XT1970-2

Download Motorola XT1970-2 Android 10 Firmware Flash File:

Latest Stock Firmware Flash File Now available for the Motorola XT1970-2 & Now You can download it From Below. You can use This Firmware to unbrick Your Phone by using RSD Lite.

Motorola XT1970-2 Run on Android 9.0 & it is Powered by Exynos 9609 Processor. it is a Single SIM (GSM) Smartphone that Support eSIM Card. Connectivity options Include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G.

Must Require:

Why We Need Stock Firmware?

  • to Downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s:

  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Motorola XT1970-2
Type: Full ROM
Size: up to 2.1GB
SoC: Exynos 9609
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version:QSAS30.62-28-7

Download Links:

How to Install Stock Firmware on Motorola XT1970-2:

  • Download & Extract Firmware & RSD Lite tool
  • Install RST Lite and usb Driver on Computer
  • After Extracting The Firmware You will see an XML file “XXX” then open the file with notepad. Remove all lines with the word “getvar” there were two lines that have the word “getvar”, then save. (Note: Skip if No getvar)
  • Open RSD Lite, Press the “…” Next to the Filename. Find and select the XML file that has been edited in step No.3
  • Reboot Phone to fastboot Mod and Connect to PC (if dead try Switched Off Phone)
  • Click Download/Start, Wait until Flashing Complete. Then unplug Phone and Switch it on
Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.