Download Firmware for Infinix hot 9:
Official Stock Firmware Flash File Now available for the Infinix hot 9 & You can Download it From Below. Official Stock Firmware for Infinix hot 9 Will help You to Restore Your Bricked device. the Firmware come in Scatter format Which Can be Flash either with SP Flash tool or Miracle box.
Infinix hot 9 Run on Android 10 & it is Powered by Mediatek MT6762 Processor. it is a Dual SIM (GSM) Smartphone that Support Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to Prevent accidental shut down during the process
Firmware Information:
Device Name: Infinix hot 9
Type: Full ROM
Size: up to 1.8GB
SoC: Mediatek MT6762
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: X655C-H6211ABKG-Q-200330V201
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware/ Flash File | X655C-H6211ABKG-Q-200330V201 | Download |
How to Install Stock Firmware on Infinix hot 9:
- Extract Downloaded Official Stock ROM..
- Install Mediatek Vcom Driver on Your PC.
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & switch it ON
How to Flash using Tecno Flash tool:
- Download & Extract Firmware
- Download & Extract tecno flash tool
- Install Mediatek VCOM driver on Computer
- open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
- click on grey ‘Settings icon’ on the top-Left corner of the screen.
- In the Popup Click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
- Connect Your Switched of phone to Computer by Pressing volume up & down Key
- Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar
- Once done, flashing bar will turn Green, now disconnect your phone from your computer & switch it on.
Read also:
have any question Let Me Know via Comment.