Download Stock Firmware for Itel S13 Pro:
Official Stock Firmware Flash File Now available for the Itel S13 Pro & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box. by using this firmware you can solve all software Issues on your Itel S13 Pro such as hang Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
In some cases We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your Itel S13 Pro lag or has an issue, then flash the Stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Itel S13 Pro.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- first make a complete backup of your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Itel S13 Pro
Type: Full ROM
Size: up to 1GB
SoC: Mediatek MT6580
Os: Android 8.1
Password: Null
Root access: Not
Gapps: Included
Firmware Version: S13Pro-F8012-8.1-OP-V012-20180903
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware /Flash File | S13Pro-F8012-8.1-OP-V012-20180903 | Download |
How to Install Stock Firmware on Itel S13 Pro:
- Extract downloaded Stock firmware..
- Install Mediatek VCOM driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & connect Your switched off Phone by pressing volume up & down key.
- You can see Flashing Process on screen. after complete unplug & switch it On
Read also:
have any issue, Let me know via comment