How to Install Stock Firmware on Mediatek Devices

Official Firmware Installation Guide for Mediatek Devices-

Note-

1. This is a unique guide which is work on almost all Mediatek Devices,so follow this one for any Mediatek Device flashing,
2. Flashing The Rom by Sp flash tools will erase all your Data with official Rom, So create a backup of your personal data before Flashing, if possible,
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s
4. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off,
5. Follow all steps correctly otherwise it cause bootloop,

What you Need-

1. SP flash tools
2. official Rom
3. usb cable
4. VCom Driver [Must Require]
5. PC and patience

Let’s get Stared-

1. First of All Download SP flash tools and Extract Inside a Folder, you can Extract in C drive for batter work,
2. Download and install Vcom Driver In your PC, This is a must requirement of Sp flash tools Flashing, without the Driver you can’t Flash the Device
3. after That Download official Firmware File, Select your Device From Drop Down menu and Download Rom,
4. Extract Download Rom file Inside a Folder, you can Extract on the Desktop for batter navigations,
5. Go to Sp flash tools Folder and Run’Flash tools.exe’ File,
6. Navigate the Download tab and then Click over Load Scatter File, a pop up is now opened, navigate Scatter File From Downloaded Rom folder and Click OK,
7. Check everything,[ in custom Recovery case Check Recovery only, and then hit over the ‘Download’

1. As soon as connect your Switched off phone to your PC via usb cable, and wait for Success, after Some time a green circle is appear,Done,