Tecno BA2 Flash File Firmware MT6580 8.1

Download Stock Firmware/Flash File For Tecno BA2:

Download Official Stock Firmware Flash File For Tecno BA2. If You own Tecno BA2 Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

Tecno BA2 Run on android 8.1 & it is Powered by Mediatek MT6580 Processor. it is a Dual SIM (GSM) Smartphone Support Nano-SIM Card, Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.

the device come with 1GB of RAM and 16GB of Storage can be expandable via SD card. in camera department it come with 5MP Rear Camera With 8MP Front Shooter.

Note-

  • Must backup NVRAM using this Guide
  • Please Do carefully, we are not Responsible for any damage to Your device.
  • Flashing the ROM Will Erase all Your Personal Data Including Storage. So we advice You to First Make a Complete backup of Your Phone.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information:

Device name: Tecno BA2
Type: Full ROM
Size: up to 1GB
SoC: Mediatek MT6580
Os: Android 8.1
Password: Null
Root access: Not
Gapps: Included
Firmware Version: BA2-H8027ABC-OGo-190929V321

Downloads:

Firmware :

Flash Tools:

Driver: 

  • Mediatek Preloader V-COM Driver Here

How to Install Stock Firmware Tecno BA2:

  • Download and Install Mediatek Vcom Driver on Your PC.
  • Download & Extract SP Flash tools, Run SP Flash tool.exe
  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download Only. Click Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it ON

How to Flash using Tecno Flash tools

  • Download & Extract Firmware
  • Download & Extract tecno flash tool
  • Install Mediatek VCOM driver on Computer
  • open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
  • click on grey ‘Settings icon’ on the top-Left corner of the screen.
  • In the Popup Click load & Select  MT6XX_Android_scatter.txt File From Firmware Folder
  • Connect Your Switched of phone to Computer by Pressing volume up & down Key
  • Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar

  • Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it on.

Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.