How to Install 10.1.0.166 Firmware on Huawei AGS3-W09

Download 10.1.0.166 Firmware for Huawei AGS3-W09:

10.1.0.166 Firmware Now available for the Huawei AGS3-W09 and You can download it from below. this is a full service Firmware and You can Install it without Rooting the Phone. with the help of this firmware you can solve all software Issues on your  such as hang on Huawei AGS3-W09 Logo, frp lock, Fastboot Mode, display Blank or White after Flash etc.

Huawei AGS3-W09 Run on Android 10 & it is Powered by KIRIN 710 Processor. connectivity features Include hotspot, bluetooth, screen cast, WIFI & GPS. The device come with 2GB of RAM and 16GB of storage that can be expandable via SD card

Note:

  • Make a backup before Process
  • Charge the device to Prevent accidental shut down

Download Links:

  • AGS3-W09 HW EU AGASSI3-W09A 10.1.0.166(C432E2R1P1)_FIRMWARE_EMUI10.1.0_05016XSD: Download
  • Full service firmware for FRP & update (downgrade at own Risk we don’t know it work on not with current Installed firmware with in your device)

How to Install 10.1.0.166 Firmware update on Huawei AGS3-W09:

  • Open the Zip and Extract the dload folder on the Pen drive
  • turn off the Phone
  • connect the Pen-drive to Phone with the OTG cable
  • Press Volume + Volume – & Power button at same time
  • The device itself start Installation Processor, once done it will be rebooted

Note: SD card Method: Extract Zip in Phone Storage/SD card and then same Process

Optional Method:

  • Enter the service menu by dialing * # * # 2846579 # * # *
  • Press Option 4. Software Upgrade
  • Press OPTION 1. Memory Card Upgrade

Extracted Firmware Look Like below Image


LEAVE A REPLY

Please enter your comment!
Please enter your name here

three × one =