Repairing a Dead Huawei P20 Pro:
Step by Step Guide to unbrick Dead Huawei P20 Pro, user Who own Huawei P20 Pro can Repair thier bricked Phone by Following the below Instructions.
Huawei P20 Pro Run on android 8.1 & it is Powered by Kirin 970 Processor. it is a Dual SIM (GSM) Smartphone Support Nano-SIM Card, Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.
the device come with 6GB of RAM and 128GB of Storage can be expandable via SD card. in camera department it come with 40+8+20MP Rear Camera With 24MP Front Shooter.
Note-
- Please Do carefully, we are not Responsible for any damage to Your device.
- Flashing the ROM Will Erase all Your Personal Data Including Storage. So we advice You to First Make a Complete backup of Your Phone.
- Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Related:
Firmware Information:
Device Name: Huawei P20 Pro CLT-AL00
Type: Full ROM/Board Software
Size: up to 2GB
SoC: Kirin 980
Os: Android 8.1
Password: Null
Root access: Not
Gapps: Included
Firmware Version: CLT-AL00_Charlotte-AL00A BD_1.0.0.46_8.1.0_R1_EMUI_8.1_0_5022GKF_HMT
Downloads:
Firmware :
- Firmware Huawei P20 Pro CLT-AL00
- Firmware for Flash tool is only available for CLT-AL00.
Flash Tools:
usb Driver:
How to unbrick Huawei P20 Pro:
- Download and Install Huawei usb COM Driver on Your PC.
- Download & Extract Firmware & tool
- carefully disassemble Your Huawei P20 Pro
- Now Connect Your Phone to PC using the usb cable
- Short the Pinout as Show in below image to enable Connection between PC and Phone. (Your PC is unable to Detect Your Phone until You Short the Pinout.)
- Run Huawei Multi Downloader and locate the Firmware
- Connect Phone to PC by pressing Volume up & Down button
- Now Click Start/Download
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.