So, your Pixel 7, 7 Pro, 8, or 8 Pro is completely dead. No charging, no boot, no fastboot mode. Just… nothing. due to flashing wrong firmware or changing slot’s.
You’ve tried the usual tricks—different cables, button combos—but your phone is not responding at all.
You’re not alone.
These newer Pixels, especially the Tensor-powered models, are great when they work—but when something goes wrong (like a failed update or bad flash), they can go completely black. We call this a hard brick.
What’s a Hard Brick?
A hard-bricked Pixel is basically a phone that:
- Shows no signs of life
- Doesn’t boot into fastboot or recovery
- Isn’t detected by a computer
- Doesn’t respond to button presses
The Good News: We Can Fix It Without Opening the Phone
Yes, seriously.
✅ No opening the phone
✅ No MIPI tester or JTAG
✅ No risky hardware hacks
✅ No ISP pin soldering
This is a 100% USB-based solution that communicates with the phone’s chipset at a low level—even when the device looks totally dead.
How Does It Work?
We use a private engineering toolset—not something you’ll find online or in public forums. It includes:
- A custom loader that talks to the phone in its dead state
- Partition fix scripts to repair broken GPT, ABL, and bootloader areas
All done via USB on a PC. No screwdriver needed.
The entire process usually takes around 5 to 10 minutes—and in most cases, the phone comes back to life, booting as normal.
Is This Legit?
Yes. We’ve already recovered multiple hard-bricked Pixels using this exact method.
✅ Works on:
-
Pixel 7 / 7 Pro panther / cheetah
-
Pixel 8 / 8 Pro Husky / shiba
Want Help?
If you’re a repair shop or technician, or you’ve got a dead Pixel and need help, feel free to reach out.
How to Repair?
- Run unbrick tool as an administrator
- Press all three buttons and connected the cable