Download official Firmware for Teclast P3B1:
Official Stock Firmware Now available for the Teclast P3B1 & You can download it from below. by using this firmware you can solve all software Issues on your Teclast P3B1 such as hang on logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Pre-Requirement’s
- flash at own risk
- first make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Download Links:
Download correct Firmware according device region. wrong firmware may not work correctly. It’s essential to be aware that flashing may carry the risk of bricking your device. Proceed with caution and at your own risk when engaging in the flashing process.
How to Install Stock Firmware on Teclast P3B1:
- download & extract Phoenix suit on your computer
- download & extract your device firmware on your computer
- Run PhoenixSuit.exe file from PhoenixSuit folder
- Click Firmware on top Menu, locate firmware Image (Firmware_version.IMG File)
- connect Your switched off device to computer by Pressing volume up & down key
- Once You see a data wipe Prompt Select yes Both time, Download Process started.
- once done disconnect and switch it on..
Check other articles-