RMX2020 Realme Narzo 10A Flash File Firmware

Download Stock Firmware /Flash File For RMX2020 Realme Narzo 10A:

official Stock Firmware Flash File Now available for the Realme Narzo 10A & You can Download it From below. The ROM come in Oppo Flash package You need a Authorized Oppo ID to Flash it by using the oppo Download tools Which is Included along with the Firmware.

Realme Narzo 10A Run on Android 10.0 & it is Powered by Mediatek helio G70 Processor. it is a Dual SIM (GSM and GSM) Smartphone Support Nano-SIM Cards. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G and 4G.

The Device  Come with 3GB of RAM and 32GB of Storage Can be Expandable via SD Card. in Camera Department it Come with 12+2+2MP Rear Camera With 5MP Front Shooter.

Note:

  • Flashing the ROM will erase all Your Personal Data including Storage. So we advice You to First Make a Complete backup of Your Phone.
  • Please Do carefully, We are Not Responsible for any Damage to Your Device.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information-

Device Name: Realme Narzo 10A
Type: Full ROM
ROM Size: up to 12GB
SoC: Mediatek Helio G70
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version:RMX2020_11_A.65_210821_7533c19f

Download Links:

Flash Tools:

usb Driver: 

How to Install Official Firmware on Realme Narzo 10A:

  • unpack downloaded Firmware using this tool
  • then disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • select download onlyClick Download & Connect Your switched off Phone.

  • You can see flashing Process on screen. after complete unplug & switch it on

How to Flash/unbrick Realme Narzo 10A Via Oppo Download tool:

  • Extract ROM File & Download tool in same Folder
  • Now Install correct driver on PC
  • connect Phone to PC with USB
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Fixes & Solutions:

if there was a flashing error untick below Listed Partition in SP flash tools

  • opporeserve2
  • cdt_engineering
  • md1mg
Related: