RMX2003 Realme Narzo Flash File Firmware Latest Version

Download Stock Firmware /Flash File For Realme RMX2003:

official Stock Firmware Flash File Now available for the Realme RMX2003 & You can Download it From below. The ROM come in Oppo Flash package You need a Authorized Oppo ID to Flash it by using the oppo Download tools Which is Included along with the Firmware.

Realme RMX2003 Run on Android 10.0 & it is Powered by Mediatek MT6785T Processor. it is a Dual SIM (GSM and GSM) Smartphone Support Nano-SIM Cards. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G and 4G.

The Device  Come with 4/6GB of RAM and 64/128GB of Storage Can be Expandable via SD Card. in Camera Department it Come with 64+8+2+2MP Rear Camera With 16MP Front Shooter.

Note:

  • Flashing the ROM will erase all Your Personal Data including Storage. So we advice You to First Make a Complete backup of Your Phone.
  • Please Do carefully, We are Not Responsible for any Damage to Your Device.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information-

Device Name: Realme RMX2003
Type: Full ROM
ROM Size: up to 12GB
SoC: Mediatek MT6785T
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: RMX2003_11_B.65_210818_8c6bb7eb

Download Links:

Flash Tools:

usb Driver: 

How to Install Official Firmware on Realme RMX2003:

  • First Disable DAA and SLA Authentication by following this guide
  • Prepare Scatter Firmware by Extracting the ofp File using ofp Extractor
  • Install Mediatek VCOM driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download only, Click Download & connect Your switched off Phone by pressing volume up & down key.

  • You can see Flashing Process on screen. after complete unplug & switch it ON

How to Flash Realme RMX3202 Via Oppo Download tool:

  • Extract ROM File & Download tool in same Folder
  • Now Install correct driver on PC
  • connect Phone to PC with USB
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Fixes & Solutions:

if any flashing error untick below Listed Partition in SP flash tools

  • opporeserve2
  • cdt_engineering
  • md1mg