Realme RMX1945 Flash File Firmware Free

Realme RMX1945 Flash File Free Download:

official Stock Firmware Flash File Now available for the Realme RMX1945 & You can Download it From below. The ROM come in Oppo Flash package You need a Authorized Oppo ID to Flash it by using the oppo Download tools Which is Included along with the Firmware.

Realme RMX1945 Run on Android 9.0 & it is Powered by Mediatek MT6762 Processor. it is a Dual SIM (GSM and GSM) Smartphone Support Nano-SIM Cards. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G and 4G.

The Device  Come with 2GB of RAM and 32GB of Storage Can be Expandable via SD Card. in Camera Department it Come with 3+2MP Rear Camera With 5MP Front Shooter.

Note:

  • Flashing the ROM will erase all Your Personal data including Internal Storage. So we advice you to first Make a complete backup of your Phone.
  • Please do carefully, we are Not Responsible for any damage to Your device.
  • Ensure that Your device at-least 50% Charge during flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information:

Device Name: Realme RMX1945
Type: Full ROM
ROM Size: up to 5GB
SoC: Mediatek MT6762
Os: Android
Password: Null
Gapps: Included
Root access: Not
Firmware Version: RMX1945EX_11_A.25_200501

Downloads Links:

  • RMX1941/45EX_11_C.57_210531: Download
  • RMX1945/RMX1941EX_11_C.57_210531: Download

Flash tools:

usb Driver: 

How to Install Official Firmware on Realme RMX1945:

  • unpack downloaded Firmware using this tool
  • then disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & Connect Your switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & switch it on

How to Flash Realme RMX3202 Via Oppo Download tool:

  • Extract ROM File & Download tool in same Folder
  • Now Install correct driver on PC
  • connect Phone to PC with USB
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Fixes & Solutions:

if any flashing error untick below Listed Partition in SP flash tools

  • opporeserve2
  • cdt_engineering
  • md1mg