(Android 10) How to Install Nitrogen OS on Cherry Mobile Flash S8

Nitrogen OS For Cherry Mobile Flare S8:

Latest Nitrogen OS ROM have Now been available for the Cherry Mobile Flare S8 & Now You can Download & Install it by Following the Below Instructions. Nitrogen OS ROM For the Cherry Mobile Flare S8 is a GSI Firmware Which is Smooth and Fast. the device come with ARM64 architecture With A/B Partition So We Download only ARM64 A/B ROM for it.

Cherry Mobile Flare S8 Run on android 9.0 & it is Powered by Mediatek helio P23 Processor. it is a dual SIM (GSM and GSM) Smartphone Support Nano-SIM cards. Connectivity options Include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G and 4G.

The device come with 3GB of RAM and 32GB of Storage can be expandable via SD card. in camera department it come with 13+2MP Rear camera with 13MP Front Shooter.

Note:

  • Flashing the ROM will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
  • Please Do carefully, We are Not Responsible for any Damage to Your Device.
  • Must backup NVRAM using this Guide before Doing anything.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.

Downloads:

How to Install Nitrogen OS on Cherry Mobile Flare S8:

  • Download Extract GSI.img to device Storage
  • Reboot Phone to twrp
  • Go to backup Section and Make a Nandroid backup
  • Select Install then Select Install Image
  • Locate & Flash system.img in System Partition.
  • Go back and Reboot system Now. first boot take around 10 Min to bootup..

We can Install Same via fastboot:

fastboot erase userdata
fastboot flash system system.img