Motorola XT2087-2-DS Firmware Flash File

Download Motorola XT2087-2-DS Android 11 Firmware Flash File:

Official Stock Firmware Flash File Now available for Motorola XT2087-2-DS & You can download it from below. by using this firmware you can solve all software Issues with in your Motorola XT2087-2-DS such as hang on Logo, frp lock, Fastboot Mode, display blank or white after Flash, dead recovery, dead after flash etc.

Motorola XT2087-2-DS Run on Android 10 & it is Powered by QCOM SD730G Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include GPS WIFI hotspot Bluetooth 3G & 4G. The device come with 4GB of RAM and 128GB of Storage that can be expandable via SD card.

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • First Make a complete backup of Your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Motorola XT2087-2-DS
Type: Full ROM
Size: up to 2.7GB
SoC: QCO SD730G
Os: Android 11
Password: Null
Root access: Not
Gapps: Included
Carrier: Check below list
Firmware Version:ODESSA_RETAIL_RPA31.Q2-59-17-4-3

Download Links:

Flash Tools:

usb Driver: 

How to Install Stock Firmware on Motorola XT2087-2-DS:

  • Download & Extract Firmware & RSD Lite tool
  • Install RST Lite and usb driver on computer
  • after extracting the Firmware you will see an XML file “XXX” then open the file with notepad. Remove all lines with the word “getvar” there were two lines that have the word “getvar”, then save. (Note: Skip if No getvar)
  • Open RSD Lite, Press the “…” Next to the Filename. Find and select the XML file that has been edited in step No.3
  • Reboot Phone to fastboot Mod and connect it to computer using the usb cable (if dead try switched Off Phone)
  • Click Download/start, wait until done. then unplug Phone and switch it ON
Read also: