Download Stock Firmware/Flash File Moto G7 Power XT-1955-4:
Download Official Stock Firmware Flash File For Moto G7 Power XT-1955-4. If you have Moto G7 Power XT-1955-4 Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.
In Some cases We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your Moto G7 Power XT-1955-4 lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Moto G7 Power XT-1955-4.
Moto G7 Power XT-1955-4 Smartphone is Run on Android 9.0 Which is Powered by a QCOM Snapdragon 632 Processor. the Moto G7 Power XT-1955-4 is a Single SIM (GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include, Bluetooth,, USB OTG, FM, and 4G.
The Moto G7 Power XT-1955-4 Smartphone is Come with 3GB of RAM and 32GB of Storage can be expandable via SD card.
Note-
1. Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:
1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup
Firmware Information-
Product name: Moto G7 Power XT-1955-4 Occean
Type: Full ROM
ROM Size: up to 3 GB
SoC: QCOM SD 632
Os: Android
Password: null
Gapps: Included
Root access: Not
Product version: G7_Power_XT1955-4_OCEAN_PPO29.80-27_CID50
Download
- Firmware Moto G7 Power XT-1955-4 Download
Driver:
- Driver Here
How to Install Stock Firmware Flash Moto G7 Power XT-1955-4:
- Download and Install adb fastboot Driver on PC
- Download and extract Firmware File on PC
- Now Reboot Phone to Bootloader and Connect to PC with usb
- Now open Firmware folder and Run Flashall.bat File
- Wait until Success. Done
Read also: