How to Install Stock Firmware on LG Stylo 6 LMQ730MM

Download Stock Firmware/Flash File LG Stylo 6 LMQ730MM:

official stock Firmware/ Flash File Now available for the LG Stylo 6 LMQ730MM & You can download it from below. with the help of this firmware you can solve all software Issues with in your LG Stylo 6 LMQ730MM such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

LG Stylo 6 Run on Android 10 & it is Powered by Mediatek MT6765 Processor. connectivity Option’s Include GPS, Wi-Fi, hotspot & bluetooth. the device come with 3GB of RAM and 64GB of storage that can be expandable via SD card.

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • fix some serious issue in phone
  • remove FRP Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • first make a complete backup of your Personal data (if possible)
  • charge the device at least 50% to prevent accidental shut down during the process
Must Require:

Note:

  • backup Personal data before process
  • Flashing May brick Your Phone, do at own Risk
  • charge the device to Prevent accidental shut down
Must Require:

Firmware Information:

Device Name: LG Stylo 6 LMQ730MM
Type: Full ROM
Size: up to 2.6GB
SoC: Mediatek MT6765
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Region: MTP/ US
Firmware Version: Q730MM10q_00_MPCS_US_OP_1221.kdz

Downloads:

Firmware LG K510BMW

  • Q730MM10q_00_MPCS_US_OP_1221.kdz :Download
  • Custom DLL Path: C:\Program Files (x86)\LG Electronics\LGUP\

Flash Tools:

USB Driver: 

How to Install Stock Firmware on LG Stylo 6 LMQ730MM:

  • Download & Install LGUP tools
  • Download and Install the LG USB Drivers.
  • Connect Your LG Phone and then Run the LGUP Flash tool.
  • Your LG Phone Will be listed on the LGUP tool. If not then Please check the USB connection once More.
  • Now click on the Upgrade option in LGUP and choose the kdz Stock Firmware File’s Path, Locate the KDZ file.
  • Then click on the Start button to start the firmware flashing process. once done disconnect device and switch it on.

Read also: