Download EMUI 9.0 Pie Firmware update Huawei P20 Pro CLT-L04:
Download official android 9.0 Pie EMUI 9.0 update for Huawei P20 Pro CLT-L04 Which is available for Some Region’s. if you own Huawei P20 Pro CLT-L04 then you can update your Phone to latest OS using bellow instructions. New update for Huawei P20 Pro CLT-L04 will improve system stability Google Security and as Well as Performance of Huawei P20 Pro CLT-L04. Before Downloading the Firmware Make Sure You have Correct Model. you Can Check Model information in ‘Firmware info Section’. Complete Changelog also attached in firmware Information Section.
The Huawei P20 Pro CLT-L04 is Run on android oreo OS [upgradble] Which is Powered by 2.36GHz octa-core processor and it comes with 6GB of RAM. The phone packs 128GB of internal storage that can be expanded up to 256GB via a microSD card. As far as the cameras are concerned,
The Huawei Mate 10 Come with a 4000mAh non removable battery also it Come with a 6.1 inch AMOLED Display.
Note-
1.Must Create a backup of Your ROM and Personal data.it will help You to Restore or Fix Bootloop.
2.This Guide is Work only on Listed Device So make Sure You have correct Device, Don’t try on any other Device otherwise it will cause bootloop.
3.it will Erase all your Data Include Personal information, so create a backup of personal data including NVRAM.
4.Make Sure Your phone Have at least 40-50% Charge to prevent accidental Shut Down.
5. Method 3 is best. dload Method only for MM Devices with SD card update. Method 1& 2 are optional.
Firmware Information-
- Device: Huawei P20 Pro
- Model No: CLT-L04
- Android OS: 9.0
- Pie: 9.0.0.160
- EMUI: 9.0
- Firmware: B160/b159
- Status: Official
- Type: Full firmware image
- Size : up to 4 GB
Download-
| CLT-L04C792E3R1P9B160 (9.0.0.160) |
| CLT-L04C69E3R1P9B159 (9.0.0.159) |
How to Install official Firmware on Huawei P20 Pro CLT-L04:
- Download HiSuit From Here
- Set the DNS address 81.177.139.39 in Your network connection.
- Connect the phone with PC With HiSuite Running, wait until it Installs the mobile application and join the phone.
- In HiSuite, Click “Update” and agree to Install the update found. Then Cancel the Installation, go to the folder C: \ Users \% username% \ Documents \ HiSuite \ ROM . Replace files with the extension “.zip.dbk” with pre-downloaded firmware files ( update.zip, update_full_ * .zip, update_data_full_public.zip ).
- Again, Click “Update” and see that the firmware is loaded 100%, after which the download will Start on the Phone.
- Restoring the DNS settings to the original value, since during the update authentication, an error like “Server is not available” is possible.
- When the firmware is downloaded – the phone will reboot and start the installation
More Method:
- Some More Installation Method Here