Download 9.0.1.132 Stock Firmware For Huawei P Smart Z:
Download Official Stock Firmware Flash File For Huawei P Smart Z. If You own Huawei P Smart Z Smartphone and Looking For the official Firmware (Flash File) For it, then You are on a Correct Place, You Can Download it From This page..
In Some cases We have bricked our device, then we can bring back the Phone (Unbrick) using the stock Firmware. also if You feel Your Huawei P Smart Z lag or has an issue, then flash the Stock firmware from the list below and Save from Situation. Stock Firmware Doesn’t void a warranty on Your Huawei P Smart Z.
The Huawei P Smart Z Run on android 9.0 OS Which is Powered by a Kirin 710 Processor. it is a Dual SIM (GSM and GSM) Smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G and 4G.
The Device Come with 4GB of RAM and 64GB of Storage Can be expandable via SD Card. In camera Department it Come with 16+2MP Rear Camera With another 16MP Popup Shooter.
Note-
1. Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:
1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup
Firmware Information:
Product name: Huawei P Smart Z/STK-LX1
Type: Full ROM
Size: 4 GB
SoC: Kirin 710
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Product Version: 9.0.1.132
Pre Requirement’s:
Downloads:
Firmware :
- 9.0.1.132 STK-LX1/L21 expired
- OTA: above one Work for both
Flash Tools:
Driver:
- Driver Here
How to unbrick Huawei P Smart Z:
- First of Download and Extract the Firmware Package From the above
- Run Huawei update Extractor Go to Setting and Disable header Check [Must Require]
- Now Go back and Extract Update.app
- Now you will Get System.img , boot.img and Some Other Files.
- Move system.img and boot.img File From This folder to adb tools Folder
- Now reboot Phone Phone to bootloader and Connect to PC with usb
Open CMD and type below code’s
fastboot flash boot boot.img
fastboot flash system system.img
then fastboot reboot
Note: if You have Dead or Locked Huawei Phone then Final Solution is Paid with with test Point(Flash it With IDT Require Image (board Software) From Easy Firmware)
How to Install OTA With Pen Drive/SD Card:
- Open the Zip and extract the dload folder on the pendrive
- Turn off the Phone
- Connect the pendrive with the OTG cable
- Now press the three buttons at the same time.
- Volume + Volume – Power button.
Note: You Can use SD card also, Extract Zip in Phone Storage and Same Process.
Optional Method:
- Enter the service menu by dialing * # * # 2846579 # * # *
- Press Option 4. Software Upgrade
- Press OPTION 1. Memory Card Upgrade
How to Install OTA Firmware With twrp:
- Download update Package From above
- Download HuRupdater.zip and Move it to Device Storage along with update file.
- Make Sure all Files (Like full, public, and update zip) available in Same Folder
- Reboot Phone to twrp Recovery. Go to backup and Create a nandroid backup
- Go to Install and Install HURupdater.zip. Done Reboot system Now.
- if the Phone is not bootup Then Flash no verity opt Encrypt.zip. Done
Note: Some More Installation Method (Including New DNS Method) You Can try From Here
have any question Let Me Know Via Comment.
Read also:
So this is a Complete Guide to Flash This Device. if You have any question Let Me Know via Comment.