Download EMUI 9.0 Pie Firmware update Huawei Nova 3 PAR-TL00 PAR-AL00
Download official android 9.0 Pie EMUI 9.0 update for Huawei Nova 3 PAR-TL00 PAR-AL00 Which is available for Some Region’s. if you own Huawei Nova 3 PAR-TL00 PAR-AL00 then you can update your Phone to latest OS using bellow instructions. New update for Huawei Nova 3 PAR-TL00 PAR-AL00 will improve system stability Google Security and as Well as Performance of Huawei Nova 3 PAR-TL00 PAR-AL00. Before Downloading the Firmware Make Sure You have Correct Model. you Can Check Model information in ‘Firmware info Section’. Complete Changelog also attached in firmware Information Section.
The Huawei Nova 3 PAR-TL00 PAR-AL00 is Run on android oreo OS [upgradble] Which is Powered by 2.3GHz octa-core processor and it comes with 6GB of RAM. The phone Packs 128GB of internal storage that can be expanded up to 256GB via a microSD card. As far as the cameras are concerned,
The Huawei Nova 3 PAR-TL00 PAR-AL00 Come with a 3750mAh non removable battery also it Come with a 6.3 inch IPS Display.
Note-
1.Must Create a backup of Your ROM and Personal data.
2.This Guide is Work only on Listed Device So Make Sure You have correct Device only.
3.it will Erase all your Data Include Personal information.
4.Make Sure Your Phone Have at least 40-50% Charge to Prevent accidental Shut Down.
5. Method 3 is best. dload Method only for MM Devices with SD card update. Method 1& 2 are optional.
Firmware Information-
- Device: Huawei Nova 3
- Model No: PAR-TL00 PAR-AL00
- Android OS: 9.0
- Pie: 9.0.0.167
- EMUI: 9.0
- Firmware: B167
- Status: Official
- Type: Full firmware image
- Size : up to 4 GB
Download-
Tools:
| PAR-TL00C01E86R1P4B167 PAR-AL00C01E86R1P4B167 (9.0.0.167) |
How to Install official Firmware on Huawei Nova 3 PAR-TL00 PAR-AL00:
- Download HiSuit From Here
- Set the DNS address 81.177.139.39 in Your network connection.
- Connect the phone with PC With HiSuite Running, wait until it Installs the mobile application and join the phone.
- In HiSuite, Click “Update” and agree to Install the update found. Then Cancel the Installation, go to the folder C: \ Users \% username% \ Documents \ HiSuite \ ROM . Replace files with the extension “.zip.dbk” with pre-downloaded firmware files ( update.zip, update_full_ * .zip, update_data_full_public.zip ).
- Again, Click “Update” and see that the firmware is loaded 100%, after which the download will Start on the Phone.
- Restoring the DNS settings to the original value, since during the update authentication, an error like “Server is not available” is possible.
- When the firmware is downloaded – the phone will reboot and start the installation
Method 2 With twrp:
- Download update Package From above
- Download HuRupdater.zip and Move it to Device Storage along with update file.
- Make Sure all Files (Like full, public, and update zip) available in Same Folder
- Reboot Phone to twrp Recovery. Go to backup and Create a nandroid backup
- Go to Install and Install HURupdater.zip. Done Reboot system Now.
- if the Phone is not bootup Then Flash no verity opt Encrypt.zip. Done
More Method:
- Some More Installation Method Here