Official Stock firmware have Now been available for the HUAWEI MATEPAD 11 and You can download it from below. by using this firmware you can solve all software Issues on your HUAWEI MATEPAD 11 such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash etc.
Note:
- Flash at own risk
- Read NVRAM
- Make a backup before Process
- Charge the device to Prevent accidental shut down
Download Links:
- DBY-W09 HW RU DBY-W09S_102.0.0.251(C10E3R3P2): Download
- full service firmware for FRP & update (downgrade at own Risk I don’t know it will work or not work with current Installed firmware)
How to Install Stock Firmware on HUAWEI MATEPAD 11:
- Open the Zip and Extract the dload folder on the Pen drive
- turn off the Phone
- connect the Pen-drive to Phone with the OTG cable
- Press Volume + Volume – & Power button at same time
- The device itself start Installation Processor, once done it will be rebooted
Note: SD card Method: Extract Zip in Phone Storage/SD card and then same Process
Optional Method:
- Enter the Service menu by dialing * # * # 2846579 # * # *
- Press Option 4. Software Upgrade
- Press OPTION 1. Memory Card Upgrade
Extracted Firmware Look Like below Image
