Huawei JNY-L02A Flash File Firmware (Stock ROM)

Download Stock Firmware/ Flash File for Huawei JNY-L02A:

Official Stock Firmware Flash File Now available for the Huawei JNY-L02A & You can download it from below. by using this firmware you can solve all software Issues on your Huawei JNY-L02A such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Huawei JNY-L02A Run on Android 10 & it is Powered by Kirin 810 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, bluetooth 3G & 4G. The device come with 6GB of RAM and 64GB of storage that can be expandable via SD card.

Note:

  • flash at own risk

Why We Need Stock Firmware?

  • to downgrade a device
  • to upgrade a device
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on a device
  • completely Re-Installation of Board Software
Safety Require:

Firmware Information:

Device Name: Huawei JNY-L02A
Type: Full ROM+ OTA’s
ROM Size: up to 3-6GB
SoC: Kirin 810
Os: Android 10
Password: Null
Gapps: Not Included
Root access: Not
Firmware version:
JNY-L02A_10.0.1.167_C636E2R3P1_Firmware_EMUI10.0.1_05016NLS_Dload

Download Links:

EDL/ Board Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)

  • 10.0.1.167 EDL ROM: uploading soon

Full OTA/Dload Updates:
to upgrade a working phone (first check Installed firmware version with in your Phone)

Flash Tools:

  • Huawei IDT 2.0: Download
  • Note: if any issue with IDT Please use any other Huawei dongle

How to Install EDL Firmware on Huawei JNY-L02A:

  • Download Require Firmware From above
  • Download & Install Huawei USB COM Driver
  • Download & Run IDT 2.0 and Click on Setting’s Icon

  • Now load the XML File form Firmware Folder

  • Click OK, Connect Phone to PC and Short test Point Pinout
  • Now Click Start.
  • Wait until Installation Complete Done. update device to Latest Software via Recovery update

How to Install Full OTA Firmware on Huawei JNY-L02A:

  • Open the Zip and Extract the dload folder on the Pen drive
  • turn off the Phone
  • connect the Pen-drive to Phone with the OTG cable
  • Press Volume + Volume – & Power button at same time
  • The device itself start Installation Processor, once done it will be rebooted

Note: SD card Method: Extract Zip in Phone Storage/SD card and then same Process

Optional Method:

  • Enter the Service menu by dialing * # * # 2846579 # * # *
  • Press Option 4. Software Upgrade
  • Press OPTION 1. Memory Card Upgrade

Extracted Firmware Look Like below Image