(Guide) Flashing Honor 6x No fastboot No recovery

Flashing Honor 6x no fastboot mod No Recovery:

Step by Step Guide to Flash Honor 6x. by using this Method you can Flash Honor 6x even if it does Not have fastboot & recovery mod access. this Method Properly tested and Working on this devices. You Must have basic device disassemble Knowledge to Perform test point.

Pre-Requirements

  • disassemble Your Phone (Require for test Point)
  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Downloads:

Instructions /Steps:

  • Download & Extract Require Firmware From above
  • Download & Install Huawei USB COM Driver
  • Download & Run IDT 2.0 and Click on Setting’s Icon

  • Now load the XML File form Firmware Folder

  • Click Ok, Connect Phone to PC & Click Start. it Show ‘Waiting for the Device’
  • take a Coper Wire and Short the Pinout as show in below image

  • Just after Shoring the Pinout, You can see Flashing Process Started. after Success Restart device/