Micromax Q380N (Q380N) Firmware Flash File Solutions & Tools

Download official firmware, stock ROMs, and recovery files – all versions and regions available.

Firmware & Solutions for Q380N

  • Version: Micromax_Q380N_SW_V0.0.H_HW_V1.0
  • Updated: September 18, 2025 09:24:54
  • Size: 834.89MB
  • Type: Stock
Download Securely

Firmware & Solutions for Q380N

  • Version: Micromax_Q380N_SW_V0.0.H_HW_V1.0.0_140116_SPD
  • Updated: September 18, 2025 09:24:54
  • Size: 983.82MB
  • Type: Stock
Download Securely

Installation Guide for Stock Firmware on Micromax Q380N

  1. Install usb driver (oplus all in one driver installer)
  2. Download and Unzip ROM
  3. Download Latest Flash Tool
  4. Open FlashTool.exe
  5. Browse and Select Firmware
  6. Click Download/Flash
  7. Plug Switched off device by pressing Volume up + down button
  8. Once done, the device start itself..
Note: some devices require auth, in that case you have to use official Auth tool or third party supported tool
Flash Tool Links
SP Flash Tool, QFIL or Upgrade download tool according the device chip.
Bootloader Unlocked Devices:
  • Flash using fastboot enhance tool
Contact Me for unbrick, frp, reset, region change , root & auth flash

⚠️ Disclaimer & Safety Guidelines

  • Proceed at your own risk – Wrong flashing may brick your device.
  • Always make a full backup before process.
  • Make sure your device is charged.

Note: All resources on this page are sourced from public domains and community efforts. For removal requests or issues, contact us directly.