Lava X3 (Lava X3) Firmware Flash File, Tools & Solutions

Download Lava X3 official firmware, Stock ROMs, and recovery files for free

Lava X3 runs on the Android OS and is powered by a MT6761 Helio A22 processor. The device comes with a 6.52-inch display, 3 GB of RAM, and a 4000 mAh battery. The firmware files provided below will help you unbrick your device, fix 'stuck at logo' issues, and recover your Lava X3 software.

Firmware & Solutions for Lava X3

  • Version: Lava_X3_S108_20151222_
  • Updated: September 18, 2025 08:05:11
  • Size: 908.37MB
  • Type: Stock
Download File

Firmware & Solutions for Lava X3

  • Version: Lava_X3_S108_20151222
  • Updated: September 18, 2025 08:05:10
  • Type: Stock
Download File

Installation Guide for Lava X3 Stock Firmware

  1. Install usb driver (oplus all in one driver installer)
  2. Download and Unzip ROM
  3. Download Flash Tool
  4. Run FlashTool.exe
  5. Browse and Select Firmware
  6. Click Download/Flash
  7. Plug Switched off device by pressing Volume up + down button
  8. Once done, the device start itself..
Note: some devices require auth, in that case you have to use official Auth tool or third party supported tool
Flash Tool Links
SP Flash Tool, QFIL or Upgrade download tool according the device chip.
Bootloader Unlocked Devices:
  • Flash using fastboot enhance tool
Contact Me for unbrick, frp, reset, region change , root & auth flash

⚠️ Disclaimer & Safety Guidelines

  • Proceed at your own risk – Wrong flashing may brick your device.
  • Always make a full backup before process.
  • Make sure your device is charged.

Note: All resources on this page are sourced from public domains and community efforts. For removal requests or issues, contact us directly.