📢 Free Resources for Huawei MatePad Pro MarxR-W39C (MarxR-W39C)

Flash File Firmware & Solutions for MarxR-W39C

📌 Version: Huawei_MatePad_Pro_MarxR-W39C_102.0.0.107_C00E107R1P10_General_HarmonyOS_2.0.0_05017RFK_DLoad

📅 Updated: September 21, 2025 13:45:19

💾 Size: 4.94GB

📦 Type: Stock

⬇ Download Now

How to Install Stock Firmware on Your Huawei MatePad Pro MarxR-W39C

  1. Install usb driver (oplus all in one driver installer)
  2. Download and Unzip ROM
  3. Download Flash Tool
  4. Open Flash Tool exe
  5. Browse and Select Firmware
  6. Click Download/Flash
  7. Plug Switched off device by pressing Volume up + down button
  8. Once done, the device start itself..
Note: some devices require auth, in that case you have to use official Auth tool or third party supported tool
Flash Tool Links
SP Flash Tool, QFIL or Upgrade download tool according the device chip.
Bootloader Unlocked Devices:
  • Flash using fastboot enhance tool
Contact Me for unbrick, frp, reset, region change , root & auth flash
Disclaimer:
  • Flash at own risk
  • Make a backup before Process.

Note: Everything listed on this page is collected from public sources and community contributions. If you own any content and wish to have it removed, please contact us.