Coolpad NX1 (NX1) Firmware Flash File, Tools & Solutions

Download Coolpad NX1 official firmware, Stock ROMs, and recovery files for free

Coolpad NX1 is a mid-range tablet that runs on the MT6735P processor. The device comes with a 5.0-inch display and 1000 MB of RAM, making it a decent choice for media. With the help of official stock firmware, you can restore your device to its factory condition and fix issues such as hang on logo, bootloops, and dm-verity corruption.

Firmware & Solutions for NX1

  • Version: Coolpad_NX1_MT6735_29062017_5.1
  • Updated: September 21, 2025 11:38:41
  • Size: 954.41MB
  • Type: Stock
Download File

Installation Guide for Coolpad NX1 Stock Firmware

  1. Download FlashTool According device chip
  2. Install usb driver (oplus all in one driver installer)
  3. Download and Unzip ROM
  4. Run Flash Tool
  5. Browse and Select Firmware
  6. Click Download/Flash
  7. Plug Switched off device by pressing Volume up + down button
  8. Once done, the device start itself..
Note: some devices require auth, in that case you have to use official Auth tool or third party supported tool
Flash Tool Links
SP Flash Tool, QFIL or Upgrade download tool according the device chip.
Bootloader Unlocked Devices:
  • Flash using fastboot enhance tool
Contact Me for unbrick, frp, reset, region change , root & auth flash

⚠️ Disclaimer & Safety Guidelines

  • Proceed at your own risk – Wrong flashing may brick your device.
  • Always make a full backup before process.
  • Make sure your device is charged.

Note: All resources on this page are sourced from public domains and community efforts. For removal requests or issues, contact us directly.