Rooting is the way to obtain Supersu Right’s on a Android device, that means after Rooting the Phone have (sudo) full Right to perform any system task.
Blackview A55 Pro Run on Android 11 & it is Powered by Mediatek MT6762 Processor. it is a dual SIM smartphone support Nano SIM cards, connectivity Option’s Include GPS, Wi-Fi, hotspot, bluetooth etc. the device come with 4GB of RAM and 64GB of storage that can be expandable via SD card.
Requirement:
- unlock bootloader: follow this Guide
- ROM2box and Required USB Driver: Download
Steps to unlock bootloader & Root Blackview A55 Pro:
- Install USBDK and Mediatek driver on Your computer
- Download & Extract ROM2box
- Run ROM2Box.exe
- Click Mediatek/Firmware Reader!
- Click “Full Firmware”
- Once the process Started, turn Phone OFF, Now together Press Volume up + down key & then Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- done, it will take 15Min
- turn device ON
- Now Move boot.bin (rename it boot.img) from ROM2box/out folder to your phone
- on Phone Install Magisk Manager
- Now patch boot.img using Magisk and Move back it to computer
- on ROM2box Go to Mediatek/Service and bootloader unlock/
- Click ‘First Click me to erase Requirement‘
- again connect phone = Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key
- once done
- disconnect device
- then Click ‘unlock Method 1‘
- again connect phone = Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key
- once done, Go to Firmware Flasher/flash a Single Partition, Click ‘Select File‘
- browse tool folder and Select vbmeta.img.empty, then click vbmeta.img
- again connect phone Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key
- Success
- wipe userdata / factory Reset
- disconnect device
- Open ROM2Box.exe Go to Mediatek/Firmware Flasher/Flash Single Partition
- Select file and locate boot.img
- Click boot.img
- Once the process Started, turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- Success..
Note: have any issue we write original boot image followed by same method.