The EDL test point is typically a set of pins on the device’s circuit board that can be shorted together in order to put the device into emergency download mode. In EDL mode, the device can communicate with a computer and receive new Firmware or software through a specialized tool such as QPST or QFIL.
to enable EDL Mod on Your Black Shark 3 Pro You have to do test Point, which you can do by following the below instructions.
Note:
- test point require additional device disassemble knowledge, do at own risk
How to Short Test Point:
- Install EDL driver on your computer
- remove back cover of the Phone & find the test point as show in below image
- keep shorting the test point using a copper wire or tweezer + Insert usb
- check USB COM device under COM Port in device manager, if no device, try again
Black Shark 3 Pro Test Point Image
List of Flash tool to Communicate with Black Shark 3 Pro in EDL Mod
all the flash tool that use QPST API are works, but official QFIL tool is best, you can use some other tool like pandora box and easy jtag also a good option.
Related: