Step by Step Guide to unlock bootloader & Install GSI Firmware on Tecno Spark Power 2, if You own a Tecno Spark Power 2 Smartphone & want to unlock it then You have to do this by following the below Instructions.
Tecno Spark Power 2 Run on Android 10 & it is Powered by Mediatek MT6762 Processor. The device come with 4GB of RAM and 64GB of storage that can be expandable via SD card. it is a dual SIM (GSM) Smartphone that Support Nano-SIM cards. connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G & 4G.
Note:
- unlocking the bootloader May Void Your device Warranty.
- all data will be erased so must make a backup before Process.
Downloads:
Related to Tecno Spark Power 2:
Steps to unlock bootloader on Tecno Spark Power 2:
- Enable Developer Option From Settings, To Enable the Developer Option, Go to your Settings -> About -> Software Information -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
- Go back to settings -> Now you need to enable the USB Debugging by going to Settings -> Developer Option and USB Debugging and oem unlock.
- Now Reboot Your Phone to fastboot mod by holding Power and volume down Button. When You see fastboot Logo then connect it to PC.
- on PC Download & Setup Platform tools. Now GO to Platform tool Folder and type CMD in Search bar, it will open the Command Prompt Send below code..
fastboot oem unlock if any error fastboot flashing unlock
- on phone confirm unlocking by Pressing volume up button, then type below code to reboot and fix encryption.
fastboot format userdata fastboot reboot
How to Install GSI Firmware on Tecno Spark Power 2:
- Download treble Checker From play store
- Open treble checker and find correct Image type
- Then Download Correct Firmware From Here
- Flash it Via fastboot mod by using below code:
fastboot format userdata fastboot flash system system.img