Fix Samsung Dm Verification Failed:
Step by Step Guide to Fix Dm Verification Failed on Samsung Devices. if you are Facing This type of error then You can Fix it by Following the below instructions. but Make Sure it Will Not Repair DRK it Will fix only Dm Verification Failed. after Flashing The File You need to Repair DRK by using the Supported tools or Working Firmware.
Note-
1. Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:
1. backup NVRAM
2. Create a nandroid backup
3. backup Your Personal data
Downloads:
- SM-G935F_6.0.1_dm_verification_Bypass
- SM-J200F_5.1.1_dm_verification_Bypass
- SM-J200G_5.1.1_dm_verification_Bypass
- SM-N910C_5.1.1_dm_verification_bypass
- SM-N915G_6.0.1_dm_verification_Bypass
- SM-N920C_6.0.1_dm_verification_Bypass
- SM-N920I_6.0.1_dm_verification_Bypass
- SM-A500F_5.0.2_dm_verification_Bypass
- SM-A510F_5.1.1_dm_verification_Bypass
- SM-A710F_5.1.1_dm_verification_Bypass
- SM-G903F_5.1.1_dm_verification_Bypass
- SM-G920F_5.1.1_dm_verification_Bypass
- SM-G920F_6.0.1_dm_verification_Bypass
- SM-G920P_6.0.1_dm_verification_Bypass
- SM-G925F_5.1.1_dm_verification_Bypass
- SM-G925F_6.0.1_dm_verification_Bypass
- SM-G925I_5.1.1_dm_verification_Bypass
- SM-G925I_6.0.1_dm_verification_Bypas
- SM-G925P_6.0.1_dm_verification_Bypass
- SM-G928F_6.0.1_dm_verification_Bypass
- SM-G9287C_5.1.1_dm_verification_Bypass
- SM-G928C_6.0.1_dm_verification_Bypas
- SM-G930F _6.0.1_dm_verification_Bypass
Steps:
1) Download tools and Repair Files From above. Then Extract odin and Repair Files .
2) Install Samsung Driver on PC. Run Odin.exe From tool Folder.
3) Now Reboot Phone to Download Mod and Connect to PC with usb
4) You can see added Msg. Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“ Make sure re-partition is Not checked.
5) Now Extract & Load Repair File under their Respective Section and Click Start/Download
6 ) Wait For Success/ Done.