Realme U1 RMX1831 Flash File Firmware No Auth

Download Stock Firmware/Flash File Realme U1:

Download Official Stock Firmware Flash File For Realme U1. If you own Realme U1 Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

In some cases we have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your Realme U1 lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Realme U1.

Realme U1 Smartphone is Run on android oreo OS Which is Powered by a Mediatek helio P70 Processor.. the Realme U1 is a dual SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM, 3G and 4G.

Realme U1 Smartphone Come with 4GB of RAM and 64 GB of Storage Can be Expandable via SD Card.

Note-

  • it will erase all your data including Internal storage
  • make a backup before process
  • charge the device to prevent accidental shut download
Must Require:

Firmware Information-

Device Name: Realme U1
Type: Full ROM
ROM Size: up to 4 GB
SoC: Mediatek helio P70
Os: Android 8.1
Password: Null
Gapps: Included
Root access: Not
Firmware version: RMX1831EX_11.C.22_0220

Download Links:

Flash tools:

  • Download tool Here

USB Driver: 

How to Install Official Firmware/ROM/Flash Oppo Realme U1-

  • unpack downloaded Firmware using this tool
  • Install Mediatek VCOM driver on Your computer
  • then disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download only. Click Download & Connect Your switched off Phone.

  • Flashing Process started. once done unplug device & switch it ON

Note: if there is no usb device, then check for usb driver or try test Point method