MI Flash 2018:
MI Flash is a tools by Xiaomi for the Flashing of it’s android based Smartphone. you can use this tools to Flash firmware on android phone using the EDL and fastboot mod. If you have successfully downloaded the latest setup of Mi flash tool, just extract it with unzipping tool before installation. After that launch the Mi Flash Tool window. If it will be open or once done, switch off your Xiaomi device and boot into the Fastboot mode by pressing and holding the Power and Volume Down buttons. Once your device boots into the Fastboot mode, your phone will be on flashing process. And you will need to follow instructions which will show at your screen. Now download the latest setup of Mi flash tool by just following download section menu. If you are unable to download, just contact us via commenting.
1. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
2. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Switch off.
3. Follow all steps correctly otherwise it cause bootloop.
4. Must backup NVRAM using this Guide before Doing anything.
- Support 64bit Window
- Easy to use
- Flash Xiaomi Devices with fastboot and EDL mod
- Flash Dead Xiaomi Devices by the help of Deep Flash cable
- Flash Non Xiaomi Devices [QCOM only] with EDL Mode
1, How to Flash Official Firmware on Vivo With QCOM-DLoader.
2. How to Disbale Boot verification using No verity Disbaler.
3. How to Repair IMEI Number on Qualcomm Phone [Easy Method]
4. How to Install Xposed framework on any Android Device [also Nougat]
5. How to Root without PC [Easy method]
6. How to backup NVRAM aka IMEI Number [Easy method Mediatek]