Flashing Guide for Xiaomi Devices-
Download and Install official Rom on Xiaomi Devices, Here we will Explain you, How to install official Firmware On Xiaomi Devices using Both Deep Flash and normal cable, if your Devices is Fully bricked then You need a Xioami Deep Flash cable if partial bricked then you can Install using normal cable, Follow Below Guide,
Note-
- > Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
- > It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
- > Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Downloads-
How To Flash Hard Bricked Xiaomi Device-
- Download everything From above.
- Install mi flash on Tool on PC.
- extract global stable Rom.
- on phone enable Device Debugging[Skip if Device is not bootable] and Connect into PC via xiaomi Deep Flash cable Make Sure phone is not in Charging mod. [if the Device is Not hard Bricked then use Normal Cable if hard bricked use deep flash cable[if you don’t have deep flash cable you can make it a guide available Here. after that reboot your Device to fastboot Mod type below code with adb or Press volume down and power with switch off mod-
- adb reboot bootloader
- then Run MI flash tool{which is Install in above step}
- Locate Global stable ROM extracted Folder
- and then click on Refresh a new port is appear and 9008 mode is now Enabled For Flashing
- So click on flash and wait some time while flashing is complete
- after Completed your Phone switched on Automatically IF not then Disconnect Usb and Power on manually
- Done, Stock Rom IS Flashed and your Hard bricked Xiaomi Device IS repaired,
So this is a Complete Guide to Flash Xiaomi Devices, any Question let us know via Comment,