How to Repair Null IMEI Number on Poco X3

QCN File have Now been available for The Poco X3 & Now You can Download it From below. You can use Poco X3 QCN File to Repair Null IMEI Number, unknown baseband, MAC & BT address with in device.

Poco X3 Run on Android 10 & it is Powered by QCOM SD 720 Processor. the device comes with 6GB of RAM & 64/128GB of Internal storage can be expandable Via SD cards. In camera department 64+13+2+2MP Rear camera With 20MP Front Shooter.

Requirement:

  1. QPST Here
  2. QCN Rebuilder
  3. QCN File for Poco X3
  4. Patience.

Note: You can use any supported box.

Steps to Repair IMEI Number on Poco X3:

  • Download Everything From above. Now Run QCN Rebuilder and Select Downloaded QCN File
  • Replace IMEI Number With the Original IMEI Number ( Don’t Change otherwise Your Phone will Not accept it).  then Click Rebuild

  • Now Enable usb debugging and connect Phone to PC
  • Send the below code via CMD

Reset EFS Partition:

adb shell
su
dd if=/dev/zero of=/dev/block/sdf2
dd if=/dev/zero of=/dev/block/sdf3
dd if=/dev/zero of=/dev/block/sdf4
dd if=/dev/zero of=/dev/block/sdf5
reboot

Enable Diag Port:

adb shell
su
setprop sys.usb.config rndis,diag,adb
  • then Run QPST. Go to Restore tab and Select the Rebuilded QCN file
  • then Click Restore
  • done.

any issue with QPST simply do same with UMT