How to Flash Mediatek Phone with SP Flash tools

Mediatek Flashing Guide:

If you own a Mediatek Phone and want to Flash it then You are on Correct place in the page We are going to Show You How you can Flash Mediatek phone using The SP flash tools.

Note:

• Flashing May brick your phone
• always make a backup before Process

Require tools and Files-

File Name	Download
SP Flash tools	Download
V-COM Driver [Must Require]	Download
Stock ROM/Firmware	Download
Backup NVRAM [Must Require]	Go–Here

How to Install Stock ROM on Mediatek Phone-

Step 1- First of All Download SP flash tools and Extract Inside a Folder, you can Extract in C drive for batter work.

Step 2- Download and install Vcom Driver In your PC, This is a must requirement of SP flash tools Flashing, without the Driver you can’t Flash the Device.

Step 3- after That Download official Firmware File, Select your Device From Drop Down menu and Download Rom.

Step 4- Extract Download Rom file Inside a Folder, you can Extract on the Desktop for batter navigations.

Step 5- Go to SP Flash tools Folder and Run’Flash tools.exe’ File.

Step 6- Navigate the Download tab and then Click over Load Scatter File, a pop up is now opened, navigate Scatter File From Downloaded Rom folder and Click OK.

Step 7- Check Everything,[ in custom Recovery case Check Recovery only, and then hit over the Download.
Step 8- As soon as connect your Switched off phone to your PC via usb cable, and wait for Success, after Some time a green circle is appear.Done.

Related articles-

---

1, How to Flash Official Firmware on Vivo With QCOM-DLoader.
2. How to Disbale Boot verification using No verity Disbaler.
3. How to Repair IMEI Number on Qualcomm Phone [Easy Method]
4. How to Install Xposed framework on any Android Device [also Nougat]
5. How to Root without PC [Easy method]
6. How to backup NVRAM aka IMEI Number [Easy method Mediatek]